Aerial view of rows of unbranded white cargo vans lined up in a depot, ready for branding
Mobile installation — we come to you

Your fleet.
Branded on-site.

The Wrapsmiths is a mobile wrap installation company. We install fleet lettering, decals, spot graphics and partial wraps at your facility — plus on-site wall, window and architectural graphics, tint, and decorative & functional films.

Installation-first — you supply the graphics, we install them right Owner-operated — you deal directly with the installer Based in Maryland — Laurel / Baltimore area

Fleet-First

Built for fleets that can't sit in a shop

Moving a whole fleet to a wrap shop costs you routes and downtime. We bring the install to your yard, dock, or bay — and work through your vehicles where they already are.

  • ✓Simple, repeatable fleet branding is our specialty — logos, lettering, unit numbers, DOT info and spot graphics applied consistently across every vehicle.
  • ✓Made for high-volume facilities. Operations with indoor bays and their own printed graphics — the kind of setup run by carriers and logistics fleets like FedEx and Amazon — are exactly who this service is built for.
  • ✓You supply the materials, we supply the craft. Your graphics arrive ready to go; we handle surface prep, alignment, application and finishing.
  • ✓One vehicle or a full rollout. New units, replacements, rebrands and additions to an existing fleet.

Partial wraps are our sweet spot. You get most of the visual impact of a full wrap at a fraction of the cost and install time — and they can be done in far more locations. Full wraps are available when your site meets the requirement below.

Two unbranded white cargo vans parked in a lot, ready for fleet graphics
Blank vans are billboards waiting to happen — we brand them at your facility, not ours.

Services

What we install

Installation is the whole business. Every job is done on-site, at your location, on your schedule.

01

Lettering & Decals

Clean, straight, consistent lettering and decals for vans, box trucks, pickups and trailers — company names, logos, phone and web, unit numbers and USDOT / MC numbers. The backbone of fleet branding, done right on every vehicle.

  • Door & panel lettering
  • Logo decals
  • Unit & USDOT numbers
  • Reflective options
02

Spot Graphics & Partial Wraps

Our specialty

Large-format graphics and partial wraps that cover the panels that matter — sides, rear and hood — without a full-vehicle wrap. Faster to install, easier to repair or update, and workable in more locations than a full wrap.

  • Side & rear panels
  • Spot graphics
  • 1/4 & 1/2 wraps
  • Rebrands & refreshes
03

Full Wraps

Site requirement applies

Full wraps need controlled conditions to cure and finish properly, so we install them only where you have an indoor, climate-controlled area — a bay, warehouse or garage that stays clean, dry and temperature-stable. If your facility has that space, we'll wrap bumper to bumper on-site.

  • Indoor bay required
  • Climate-controlled
  • Fleet & single vehicles
04

Walls, Windows & Architectural

On-site installation of wall graphics, window graphics and architectural vinyl for offices, warehouses, retail and facilities — branding, wayfinding, hours and logos, privacy bands and large-format wall coverage.

  • Wall murals & graphics
  • Window lettering & graphics
  • Wayfinding
  • Frosted & privacy bands
05

Tint & Films

Window tint and decorative & functional films for vehicles and buildings — privacy, glare and heat control, decorative finishes and protective applications, installed on-site where the job allows.

  • Vehicle tint
  • Privacy film
  • Decorative film
  • Functional / solar film
Colorful large-format wall mural in a modern office
Wall GraphicsLarge-format wall vinyl installed on-site — branding and murals without paint, mess or downtime.
Frosted privacy film bands on office glass partitions
Window & Architectural FilmFrosted privacy, decorative and functional films for glass, offices and storefronts.
Installer trimming window tint film on a car window during installation
TintClean, careful tint installation for vehicles — plus film work for buildings and glass.

Before We Roll Out

What a good install site looks like

Mobile installation only works when the site is right. Here's what we need from your location — it's simple, and it's what separates a wrap that lasts from one that lifts.

1
Indoor space for full wraps

Full wraps require an indoor, climate-controlled area. Lettering, decals, spot graphics and partials are more flexible — ask us about your space.

2
Clean, dry vehicles

Vehicles washed and dry before we arrive, with enough room around each one to work panels fully open.

3
Graphics on hand

For fleet work, your printed graphics and materials should be on-site and checked in before the install window.

4
Access & power

Access to the work area during the scheduled window, plus a standard outlet for heat and lighting if we're indoors.

Not sure your space qualifies? Tell us what you've got in the request form below — a dock, a warehouse corner, a rented bay. We'll tell you straight what can be installed there and what can't.

How It Works

Four steps. No shop visit.

1

Tell us the job

Use the request builder below: what you're installing, how many vehicles or how much glass/wall, and where.

2

Confirm site & materials

We confirm your space works for the job and that graphics and materials will be ready on install day.

3

We come to you

Installation happens at your facility — vehicles stay on your lot, walls and glass stay in your building.

4

Inspect & roll out

We walk the finished work with you, panel by panel, before anything goes back into service.

Fleet & Logistics

Delivery, freight and service fleets with their own facilities and printed graphics programs.

  • Rollouts across many units
  • New-unit branding as vehicles arrive
  • Replacement & repair graphics

Local Businesses

Contractors, trades and service companies that need their vans and trucks working as advertising.

  • Lettering & logo packages
  • Partial wraps
  • One truck or a growing fleet

Offices, Retail & Facilities

Spaces that need graphics and film installed where they live — without closing down to do it.

  • Wall & window branding
  • Privacy & decorative film
  • Tint & functional film

Request an Install

Build your install request

Fill this in and it turns into a clean project brief you can copy and send to us — by email, text, or however you reach us. The more accurate the site details, the faster we can quote.

Heads up on full wraps: we only install full wraps in an indoor, climate-controlled area — it's what the film needs to go down and cure correctly. If your site doesn't have one, lettering, spot graphics or a partial wrap will usually get you the look without the requirement.

Your request summary

Your brief appears here. Copy it and send it to The Wrapsmiths at [email protected] — it has everything needed to quote the install.

Fill in the form and tap “Create My Request Summary” — your brief will be built here.
Email it to us

Questions

Straight answers

Do you come to us, or do we bring vehicles to you?

We come to you. The Wrapsmiths is a mobile installation service — vehicles are branded at your facility or lot, and wall, window and film work is installed in your building. That's the whole point: no ferrying vehicles across town and no shop downtime.

Do you print the graphics, or do we supply them?

We're installation-first. Fleet customers typically supply their own printed graphics and materials — that's the standard setup for the large fleet programs we built this service for. If you need help sourcing graphics, say so in your request and we'll talk through options before the install is scheduled.

Why do full wraps need an indoor, climate-controlled space?

Wrap film is temperature-sensitive. Too cold, too hot, dusty or wet conditions cause poor adhesion, bubbles and early lifting — especially on a full wrap with large panels and deep curves. An indoor, climate-controlled bay is what lets a full wrap go down clean and stay down. Lettering, decals, spot graphics and partial wraps are less demanding, so they can be done in more settings.

What kinds of film do you install?

Window tint for vehicles, plus decorative and functional films for vehicles and buildings — privacy and frosted films, decorative finishes, and solar / functional films for glass. Tell us the surface and the goal (privacy, heat, glare, looks) in your request.

How many vehicles can you do?

From a single van to a full fleet rollout. The Wrapsmiths is owner-operated, so scheduling is honest: tell us your count and your deadline in the request form, and we'll tell you exactly what timeline we can hit — including phased rollouts for larger fleets.

Where do you work?

We're based in the Laurel / Baltimore, Maryland area and work on-site at customer facilities. If your job is outside that area, include the location in your request — fleet and multi-day work can justify the trip.

Have graphics ready?
We'll bring the install.

Lettering, decals, partials, walls, windows, tint and film — installed at your facility, on your schedule.

Request an Install